Truma Ultraheat S 3004 Einbauanleitung Seite 21

Ultraheat
4.8 Finishing work
Fig. 22
Replace a free blank cover in the cover of the
S-heater with the blank cover with the inscription
"Ultraheat 230 V" (Fig. 22).
4.8.1 Gas check
Before initial start-up, an expert must check the heat-
er, the exhaust gas system and tightness of the entire
gas installation (in accordance with the pressure drop
method).
Check the gas system.
4.8.2 Function check
Start the Ultraheat (see "Start-Up" in the operating
instructions).
Check all functions of the S-heater and the Ultraheat
in accordance with the operating instructions.
4.8.3 Documents
Hand over the operating instructions to the user or
owner of the vehicle.
30090-00230 · 00 · 06/2021
Ultraheat 230 V
Installing Ultraheat
EN 21