Endress+Hauser SFG500 Schnelleinstieg Seite 8

3. Check that there is sufficient clearance when e.g. a connector
4
1
4. Check the position of the DIN rail
– Fieldgate SFG500 requires no lateral clearance between modules and can be
mounted directly against any other non-Ex module
– To ensure adequate ventilation and prevent overheating, there must be
50 mm (2") lateral and vertical clearance between modules and the cabinet
ducting or wall
mm (inch)
6
107 (4.2")
116 (4.6")
p
(not supplied)
Power PB DP RS485 Power
Run PB Err LAN 1 Run
Failure LAN 2 Failure
Reset
SFG500 SFG500
70 (2.8")
50 (2")
PB DP RS485 Power PB DP
PB Err LAN 1 Run PB Err
LAN 2 Failure
Reset Reset
SFG500
70 (2.8") 70 (2.8")
o
is used
3
RS485
LAN 1
LAN 2
4
Endress+Hauser