Endress+Hauser SFG500 Schnelleinstieg Seite 16

6 Basic Configuration
6.1 Basic Settings
IP address of LAN1
For all operating modes, the IP address of LAN1 must be set to one reachable by the
other system components
1. Open the Settings menu by clicking on the Settings tab of the Web Server
– Select Network Settings
2. Enter the desired IP Address, Network Mask and Default Gateway
– Press Apply to apply the changes to Fieldgate SFG500
3. A DNS Server can be configured (optional)
– If a DNS Server is available, you can enter the corresponding IP adress. This is
mandatory if you want to configure your time server or email server by its name.
Time and date
The time and date stored in the Fieldgate can also be changed in the Settings tab
1. Open the Settings menu by clicking on the Settings tab of the Web Server
– Select Date and Time
14 Endress+Hauser