Endress+Hauser SFG500 Schnelleinstieg Seite 17

2. Either in Quick Setup, press Apply to apply the settings of the connected
computer to Fieldgate SFG500 or
in Advanced Setup, enter a Time, Date and Timezone and press Apply to
apply the changes to Fieldgate SFG500.
Alternatively configure a time server. The SFG500 will automatically
synchronize the time with the server.
6.2 PROFIBUS DP station address
Fieldgate SFG500 listens to the bus and assigns itself a station address. If required,
this address can be changed in the Network tab of the Web Server.
1. Open the Network pages by clicking on the Network tab of the Web Server
2. Select PROFIBUS Settings, the PROFIBUS settings page appears
3. To change the PROFIBUS address of Fieldgate SFG500:
– In Configuration Mode, click the radio button Manual
– In Address Parameters, enter a new Station Address
– Press Apply to apply it to Fieldgate SFG500
4. You are now ready to start using Fieldgate SFG500.
• Fieldgate SFG500 configures itself during start up and adapts itself to the
baudrate and bus parameters used by the control system. Only if the PB Err LED
lights, does the user have to intervene. See here Operating Instructions
BA00070S/04/en on the CD-ROM.
Endress+Hauser 15