Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Creation of Building Layout
6.4 CREATE BUILDING LAYOUT FILE
You can create your layout file without the wizard dialogue, but it will take more time. There are 3 important steps:
•
File configuration
•
Create zones
•
Create shapes
This points will be explained next.
6.4.1 File configuration
You can configure different properties of your layout file. These properties are:
•
Zones size
•
Background colour
•
Colour patterns
•
Units source
File tab shows you different information of the building layout file. This information shows the path of your Building Layout file, the
size in MB and the date of last modifications.
Zones size and background colour can be modified on zones tab inside the file properties dialogue.
All zones will have same sizes to ban the possibility of irregular navigation on the viewer.
Minimum zone size is 400x400 pixels and maximum zone size is 2500x2500.
Background colour will be also the same in all zones. Background colour could be useful if your background image has transparency
or if you do not use background images.
Colour Patterns tab, allows you to modify the colours of the patterns. The number of patterns is fixed by the application. To change
the colour of one pattern, you have to choose this pattern on combo box.
After this you will see current colours states (Inactive, Working and Alarm), to change one of them you must to click on the colour
and a colour chooser dialogue will appear.
Set this colour patterns is important to the finally view of the installation because it each installation will have the colour of his state
and pattern set now in the edition process.
Import units tab allows you to import units.
Proxy tab let the user to type the proxy configurations in order to be able to connect to a CSNET Manager through the proxy.
Proxy connection is useful when Building Layout Software is importing the units from a CSNET Manager that is not directly
connected on same LAN than the computer.
80
PMML0303A rev.2 - 02/2015
Werbung
