Hitachi CSNET MANAGER XT Installations- Und Betriebshandbuch Seite 37

Operation and configuration of packaged units
4.1 AREA TREE
Area tree can be shown or hidden by clicking on button
over "installation" menu, all areas will showed without need to expand the area tree.
Enable Area Edition activates an area tree for this installation.
• New: Creates a new area.
• Edit: Edits the selected area in the area tree.
• Delete: Deletes the selected area.
• Up: Moves the selected area up, respecting its
level.
• Down: Moves the selected area down, respecting
its level.
• Update: Saves all the areas created and closes the
Area Edition.
• Cancel: Closes the Area Edition without saving
changes made.
?
N O T E
The areas created contain indoor units. See the following chapter if you want to select to which area each of the units belongs.
4.2 TABLE OF INDOOR UNITS
The Table of indoor units is composed of a row for each indoor unit.
The meaning of each column is as follows:
Column
Address of the outdoor unit or cooling circuit to which the
OU
indoor unit belongs
IU Address of the indoor unit
RCS Remote control number
Area Area to which the selected unit belongs
Location Name of the room conditioned by the selected unit
31 PMML0303A rev.2 - 02/2015
. If area tree is not shown, you can change the installation area clicking
Enable Area Edition
Location
Cancel
Update
New Edit Delete
Up Down
Content / Symbol
<number>
<number>
<number>
<descriptive text>
<descriptive text>