Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation and configuration of packaged units
The graph configuration window has several fields:
1
5
1 Indoor unit: Select the address of the indoor unit to be displayed.
2 Value: Contains the different values that can be displayed for the unit or cycle. See section on
for an explanation of each parameter.
units"
3 Selection buttons: Permit the addition or the elimination of a series (unit + value) of the display.
4 Selection: Series to display.
5 Graph configuration: Permits the configuration of the graph display. The "Value min" field permits the selection of the minimum
on the Y axis and the "Value max" field permits the selection of the maximum on the Y axis. "Value division" establish the
intervals between lines.
To generate a graph:
•
Select the unit (indoor unit or cycle) you wish to add to the series.
•
Select the value for the unit you wish to add.
•
Press the ">>>" button to add the selection to the series list.
•
Repeat steps 1 to 3 to add the different series required on the list. To delete a selected series, select the series list and press the
">>>" button.
•
Configure the graph as required.
•
Press "OK" to update and return to CSNET Manager.
Use the lower scroll bar to select the day. Change the day in the Day field.
The Export button permits the capture of a graphic in JPG format. The Print button permits the graph to be printed.
65
PMML0303A rev.2 - 02/2015
2
3
4
"4.7.2 Values table for packaged
Werbung
