Hitachi CSNET MANAGER XT Installations- Und Betriebshandbuch Seite 80

Configuration and display options
5.9.7 Backup copy
This option lets you make a backup copy of the CSNET Manager parameters. The Backup button saves the configuration in the file
you choose of the computer from which you accessed the system.
The Restore button re-establishes the configuration stored in the file you have specified.
5.9.8 Configuration report
Configuration report prints on a text file all the settings that CSNET Manager has.
The purpose of that is in case of wrong behaviour of the functions, report the state and help to understand if there is something not
well configured. There are two different systems to define the source of the consumed energy:
• Use configured power meter devices data: in case of having power meter devices related to the units, the energy consumed
per each indoor unit will be calculated based on the information provided by these devices.
• Enter the system consumption on the data period: in case of entering manually the consumption of the system in the desired
period, user enters the input reading data at the beginning and at the end of the period.
Current currency can also be specified.
The tariff table lets the user to set different time periods within a day with a related cost.
?
N O T E
The unit of measurement of the cost of a tariff period is the same than the input data reading. In case of using power meter device, the unit of
measurement should be the same than the specified on the power meter device configuration.
74 PMML0303A rev.2 - 02/2015