Conel CTOOLLECKPOOL Bedienungsanleitung Seite 13

13
Usage of the leak pump with the LeakPool
a) Unfold the side walls of the leak pool.
b) Insert the leakage pump into the designated flap of the leak pool
from above. Pay attention to the free water inlets.
c) Place the pool under the leak so that the leak pump is as low as
possible.
Battery operation:
d) Attach the battery to the leak pool using the tab provided and
close the Velcro.
e) Connect the leak pump to the battery.
f) Turn on the power switch on the battery. As long as this one is
switched on, the pump runs.
Mains operation:
d) Plug the leak pump directly into the power pack using the adap-
ter plug provided.
e) Plug the power pack into a mains plug. The pump starts running
immediately and runs as long as you don't disconnect.
Adapter plug
Charging the battery
a) To charge the battery, connect the mains adapter to the battery at the appropriate socket and
plug the power adapter into a power outlet.
b) Switch on the main switch on the battery (position 1).
c) The charging control LED on the power pack lights up red during the charging process.
As soon as the battery is charged, the charging control LED lights up green.
d) If the charge control LED lights up green, all charge status displays should also light up on the battery.
The battery is fully charged. The loading process is automatically terminated. You can now unplug ever-
ything again.