Atlas Copco BCP BL2-I06 Produktanweisungen Seite 17

BCP BL2-I06
3 red flashing lights followed 5 yellow flashing lights:
■
Battery voltage fault. The tool doe snot start or stops correctly.
■
The fault means that the battery voltage is not appropriate for the voltage announced in the tool.
Make sure that the tool is adapted for the battery used. If the battery used is correct=> contact our
customer service
3 red flashing lights followed 6 yellow flashing lights:
■
Overcurrent on the power circuit.The hardware limit has
been reached. The tool does not start or stops correctly
■
If the fault still appears, the power stage is faulty =>
contact our customer service
EN
© Atlas Copco Industrial Technique AB - 9836 9627 00
Service instructions
17