Axkid ENVIROKID Bedienungsanleitung Seite 8

Thank you for choosing AXKID ENVIROKID
Read this instruction manual before installing AXKID ENVIROKID car seat in your vehicle.
For more information and installation videos visit www.axkid.com.
AXKID ENVIROKID is a rear-facing car seat approved for children with
a height between 61-105cm with a maximum weight of 18 kg.
This is an i-Size Enhanced Child Restraint Module System. It is approved according to UN Regulation No. 129, for use in,
i-Size compatible vehicle seating positions as indicated by vehicle manufacturers in the vehicle user' s manual. If in doubt,
consult either the Enhanced Child Restraint System manufacturer (www.axkid.com) or the retailer.
Important information
To maximize your child' s safety, it is important that you keep the following in mind:
• Always follow the instructions in this manual. An incorrect installation may seriously affect the safety for your child. If in doubt,
contact your retailer who can demonstrate a correct installation.
• Keep this instruction manual for future reference. If manual is lost, you can find it online at www.axkid.com
• Do not use AXKID ENVIROKID and AXKID ENVIROBASE in a seating position where an active frontal airbag is fitted. If you
still wish to install the AXKID ENVIROKID car seat in this location the airbag must be switched off according to the vehicle
manufacturers instructions.
• Should you have an accident, no matter how small, your car seat should always be replaced. It may have damage that is non visual
and could seriously affect the safety of your child. For this reason, Axkid does not recommend purchasing second hand car seats.
• If the AXKID ENVIROKID has been exposed to direct sunlight, make sure that the car seat is not too hot before installing your child.
• Never leave your child unattended in the vehicle.
• Ensure that any luggage or loose objects are secured in your vehicle as they may cause injuries to passengers in the event of an
accident.
• Ensure that AXKID ENVIROKID is installed in a way where no parts become trapped by movable seats, car doors, etc.
• AXKID ENVIROKID may only be installed rear-facing.
• This car seat may ONLY be installed together with the AXKID ENVIROBASE.
• Make sure that the child' s back is pushed against the car seat when restraining you child with the harness.
• Always make sure that the harness is firmly tightened against your child and that the buckle is completely locked. You should not be
able to pinch the straps.
• Make sure there is no twist in the harness.
• Always make sure the support leg is in its correct position and have contact with the vehicle floor. Check that the indicator on top of
the support leg is green and that you don't hear any beeping sound from the support leg foot.
• Do not attempt to disassemble nor modify any part of AXKID ENVIROKID. The warranty and the safety performance of the AXKID
ENVIROKID could be affected if doing so.
• Never use AXKID ENVIROKID without the seat textile cover. The textile cover is a safety feature and may only be replaced with an
original seat textile cover.
• Read the vehicle manual to find which seating positions are suitable for AXKID ENVIROBASE and AXKID ENVIROKID.
• Axkid recommends to always use a seat protection to protect your vehicle seat from scratches and dirt.
• If in any doubts, contact the retailer where the base and compatible car seat was purchased or contact info@axkid.com.
8