Axkid ENVIROKID Bedienungsanleitung Seite 13

Care and maintenance
• The seat cover can be removed and washed in a washing machine at 30º C on the "Gentle Cycle" program. Do not put the
cover in a dryer as this can damage the cover and the padding may separate from the fabric. Visit www.axkid.com to find
videos explaining how to remove and attach the cover.
• Any plastic parts of AXKID ENVIROKID can be cleaned with mild detergent and water. Do not use aggressive chemicals
containing solvents etc, as this can cause damage to the plastic and compromise the safety of the car seat.
• All materials used in the AXKID ENVIROKID are recyclable and should be recycled as per your local legislation. Ask your local
recycling center for advice when recycling this product.
• Do not make any modifications or alterations to the AXKID ENVIROKID other than those described in this instruction manual.
Follow the instructions in this manual carefully. Any repairs must be carried out by the manufacturer or agent.
• If the seat cover needs replacing, ensure only original products from Axkid are used. If other products are used, the AXKID
ENVIROKID' s safety system may be compromised and could lead to severe injury in case of an accident.
Recycling your car seat
Axkid strongly recommends recycling of old car seats. Before leaving the seat at your local recycling station cut off the harness
straps from the seat, remove the textile cover, remove as many Styrofoam parts as possible, separate metal and plastic parts if
possible. The main part of the seat should be marked unsafe or expired (use a marker) to deter anyone from using it again. Please
check your local municipal guidelines for recycling instructions for the different materials.
Warranty
The AXKID ENVIROKID is covered by a 24-month warranty from date of purchase. Ensure you save your receipt and bring it to your
place of purchase if you have any warranty issues.
The warranty does not cover:
• Normal wear and tear
• Damage due to incorrect use, neglect or accident
• If repairs have been carried out by a third party
• All materials used have a very high UV-resistance rating. However, UV-light is very aggressive and will ultimately lead to fading of the
seat cover. This is not covered by our warranty as it is considered normal wear and tear.
13
EN