Installation In Multiple Combinations; Eco Mode - HomeMatic HMIP-WRC2 Montage- Und Bedienungsanleitung

Start-up
• Now drill the bore holes.
If you are working with a stone wall, drill the
marked 5 mm holes and insert the plugs supplied.
If you are working with a wooden wall, you can
pre-drill 1.5 mm holes to make screws easier to
insert.
• Use the supplied screws and plugs (K) to fasten
the mounting plate to the wall (see figure 4).
• Attach the clip-on frame (A) to the mounting
plate.
• Place the remote control (B) back into the frame
(see figure 1). Make sure that "TOP" and the ar-
rows on the back side point upwards and that the
clips on the mounting plate latch into the open-
ings on the remote control.
5.2.3

Installation in multiple combinations

You can mount the wall-mount remote control with the
attachment frame (A) provided or use it with frames of
other manufacturers as well as integrate the remote con-
trol (B) into a multi-gang frame. You can flexibly fix the
mounting plate (F) to the wall using adhesive strips or
screws. For mounting with multiple combinations, make
sure that the mounting plate of the push button is seam-
lessly aligned to the already fixed mounting plate/retain-
ing ring.
36
The wall-mount remote control is designed to fit into
frames supplied by the following manufacturers:
Manufacturer Frame
Berker S.1, B.1, B.3, B.7 glass
ELSO Joy
System 55, Standard 55, E2, E22,
GIRA
Event, Esprit
1-M, Atelier-M, M-Smart, M-Arc, M-
merten
Star, M-Plan
JUNG A 500, AS 500, A plus, A creation
5.3

Eco mode

In the eco mode, the temperature in the house can be re-
duced
• temporarily, e.g. for the weekly shopping,
• scheduled, e.g. for holidays, or
• permanently, for an undefined period of time,
in order to save energy.
To adjust the settings of the eco mode, proceed as follows:
• Open the Homematic IP app on your smartphone.
• Tap on the menu symbol in the top left of the
screen of your app and select the menu item "Eco
Start-up
37