Assa Abloy OneSystem 309N Montageanleitung Seite 46

Fasten the locking
cylinder with the
cylinder fixing screw
Check for complete
functionality
Fig. 6 :
No transverse shear
stress on the bolt after
installation
EN
46
Installing fittings and locking cylinders
1 Install the fittings.
2 Insert the locking cylinder and ensure that the locking cylinder nose is in the centre position (Fig. 11).
3 Fix the locking cylinder into place with the fixing screw.
 The security lock 309N is completely installed.
Testing the security lock 309N
1 Test all functions of the security lock 309N.
2 Check whether the latch and control latch of the lock are pushed back by the same impact edge.
3 Check whether the bolt can freely extend and retract without transverse shear stress after installation
(Fig. 6).
 The security lock 309N is completely installed and has been tested for functionality.
Striking plate
F
= 0
Q
N
min. 2
F
= 0
Q
N
Face plate
Installation