Hach MSM 1.5 Basis-Benutzerhandbuch Seite 6

Network type
LAN
Wi-Fi (SC1500 only)
Mobile network (3G or
Verizon/CDMA)
Ports used for LAN and Wi-Fi
Make sure that the port used is open, refer to
Description
VPN
AMQPS
NTP
http
https
Connect a controller to a network
Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the
document.
Network and access point security is the sole responsibility of the customer using the wireless instrument. The
manufacturer will not be liable for any indirect, special, incidental or consequential damages caused by a breach
in network security.
SC1500—Configure the IP address of the PC
Connect the controller to the internet for configuration and operation. Based on the configuration, the
controller connects to the internet through a mobile network or a LAN/Wi-Fi connection.
Do the steps that follow to change the IP address in Microsoft Windows on your PC or laptop.
Note: The user must have Windows administrator rights on the computer to change the Windows settings.
Note: Make sure that the PC is not connected to a LAN network.
1. Connect the SC1500 controller to the PC.
2. At the PC go to Control Panel > Network and Internet > Network and SharingCenter, then
select Change adapter settings.
3. Right-click Local Area Connection, then select Properties.
4. Highlight Internet Protocol Version 4 (TCP/IPv4), then push Properties.
5. Select Use the following IP address. Enter the settings that follow:
Option
IP address
6 English
Table 2 Connection and speed requirements
Controllers Phones
LAN cable
> 2 indicator bars > 2 indicator bars
> 2 indicator bars > 2 indicator bars
(Android) / dots (iOS)
Table
Table 3 Port list
Standard port
UDP 1194
TCP 5671
UDP 123
TCP 80
TCP 443
D A N G E R
N O T I C E
Download speed Upload speed
— > 4.4 Mbit/sec
> 4.4 Mbit/sec
> 4.4 Mbit/sec
3.
Direction
Output
Output
Output/input
Output
Output
Description
192 . 168 . 154 . 10
> 1 Mbit/sec
> 1 Mbit/sec
> 1 Mbit/sec