Hach MSM 1.5 Basis-Benutzerhandbuch Seite 12

Figure 5 Connect the USB Ethernet adapter
Configure the IP address of the PC
Do the steps that follow to change the IP address in Microsoft Windows on your PC or laptop.
Note: The user must have Windows administrator rights on the computer to change the Windows settings.
1. Go to Control Panel > Network and Internet > Network and SharingCenter, then select
Change adapter settings.
2. Right-click Local Area Connection, then select Properties.
3. Highlight Internet Protocol Version 4 (TCP/IPv4), then push Properties.
4. Select Use the following IP address. Enter the settings that follow.
Option
IP address
Subnet mask
Default gateway
Note: Record the initial values to change the values back after the configuration.
5. Push OK to confirm the settings.
Note: Change the settings to the initial values when the configuration is completed.
12 English
Description
192 . 168 . 1 . 1
255 . 255 . 0 . 0
blank