VEGA VEGASWING 61 Bedienungsanleitung Seite 30

9 Supplement
9 Supplement
9.1 Technical data
Hinweis für zugelassene Geräte
Für zugelassene Geräte (z. B. mit Ex-Zulassung) gelten die technischen Daten in den entsprech-
enden Sicherheitshinweisen im Lieferumfang. Diese können, z. B. bei den Prozessbedingungen
oder der Spannungsversorgung, von den hier aufgeführten Daten abweichen.
Alle Zulassungsdokumente können über unsere Homepage heruntergeladen werden.
General data
Material 316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
Ʋ Process fitting - thread
Ʋ Process fitting - flange
Ʋ Process seal
Ʋ Tuning fork
Ʋ Extension tube: ø 21.3 mm (0.839 in)
Materials, non-wetted parts
Ʋ Plastic housing
Ʋ Aluminium die-cast housing
Ʋ Stainless steel housing (precision
casting)
Ʋ Stainless steel housing (electropol-
ished)
Ʋ Seal between housing and housing lid Silicone SI 850 R
Ʋ Seal between housing and housing
cover (lacquer-compatible version)
Ʋ Optical fibre in housing cover
Ʋ Ground terminal
Ʋ Cable gland
Ʋ Sealing, cable gland
Ʋ Blind plug, cable gland
Ʋ Temperature adapter (optional)
Second Line of Defense resp. gas-tight leadthrough (optional)
Ʋ The Second Line of Defense (SLOD)
is a second level of the process
separation in the form of a gas-tight
feedthrough in the lower part of the
housing, preventing product from
penetrating into the housing.
Ʋ Supporting material
30
316L, Alloy C22 (2.4602)
316L, 316L with Alloy C22 (2.4602) coating, steel enam-
elled, 316L with ECTFE coating, 316L with PFA coating
Klingersil C-4400
316L, Alloy C22 (2.4602), Alloy C4 (2.4610) enamelled
316L, Alloy C22 (2.4602), Alloy C22 (2.4602) enamelled,
316L with ECTFE coating, 316L with PFA coating
Plastic PBT (Polyester)
Aluminium die-casting AlSi10Mg, powder-coated (Basis:
Polyester)
316L
316L
EPDM
PMMA (Makrolon)
316L
PA, stainless steel, brass
NBR
PA
316L
316L
VEGASWING 61 • Relay (DPDT)