Endress+Hauser Cerabar S PMC71 Beschreibung Der Gerätefunktionen Seite 228

Störungsbehebung
Warnung 106 17 General Error
134 17 General Error
116 17 General Error
701 17 General Error
745 17 General Error
613 17 General Error
702 17 General Error
710 18 Calibration Error
602 19 Configuration
Error
604 19 Configuration
Error
746 20 Electronics Failure 0
102 23 Data Integrity
Error
700 23 Data Integrity
Error
706 23 Data Integrity
Error
228
0 Other
0 Other
0 Other
0 Other
0 Other
0 Other
0 Other
0 Other
0 Other
0 Other
Other
0 Other
0 Other
0 Other
12.1.1 Fehlermeldungen Vor-Ort-Anzeige
Stellt das Gerät während der Initialisierung ein Defekt der Vor-Ort-Anzeige fest, können fol-
gende Fehlermeldungen angezeigt werden:
Meldung
Initialization, VU Electr.Defekt A110
Initialization, VU Electr.Defekt A114
Initialization, VU Electr. Defekt A281
Initialization, VU Checksum Err. A110
Initialization, VU Checksum Err. A112
Initialization, VU Checksum Err. A171
Cerabar S/Deltabar S/Deltapilot S FOUNDATION Fieldbus
STATUS_UNCERTAIN
GOOD
– BAD_NON_SPECIFIC
– STATUS_UNCERTAIN
– GOOD
UNCERTAIN_CONFIG_ERROR Pressure, Level, Flow
STATUS_UNCERTAIN
UNCERTAIN_SIM
GOOD
GOOD
UNCERTAIN_CONFIG_ERROR Level
UNCERTAIN_CONFIG_ERROR Level
STATUS_UNCERTAIN
GOOD
STATUS_UNCERTAIN
GOOD
Maßnahme
Vor-Ort-Anzeige austauschen.
Pressure, Level, Flow All
Pressure, Level, Flow None
Pressure, Level, Flow All
All
Pressure, Level, Flow All
Pressure, Level, Flow Primary Value(1)
Maximum Pressure(4)
Counter P > Pmax(5)
Totalizer 1 (6)
Pressure, Level, Flow None
Pressure, Level, Flow None
Primary Value(1)
Primary Value(1)
Pressure, Level, Flow All
Pressure, Level, Flow Maximum Pressure(4)
Counter P > Pmax(5)
Pressure, Level, Flow All
Pressure, Level, Flow None
Endress+Hauser