Storch ProCut Originalbetriebsanleitung Seite 58

Table of contents
1 General information
2 Product description
3 Safety
4 Safety instructions
5 Device overview
6 Setup/commissioning
7 Attaching to frame rail and support leg
8 Cutting variants
9 Troubleshooting
10 Maintenance
11 Detailed drawing/Spare parts overview
12 Product marking
13 Guarantee
14 Disposal
1. General information
1.1 Identification
This document is the translation of the operating manual for the ProCut foam board cutter by STORCH. The manual describes the func-
tion of the foam board cutter and provides the most important information for safe handling and use. All specifications refer to the cur-
rent state of technical development of the device and only retain their validity if no changes have been made to the device.
1.2 Important notes on the operating manual
1.2.1 Keeping the operating manual
The manual must be available at all times during the life cycle of the device.
1.2.2 Applicable documents
Declaration of Conformity
2. Product description
2.1 Product data
2.1.1 Technical data
Cutting length
Cutting depth
Device weight
Cutting mode
Fuse
Cable length
Power supply
No responsibility is accepted for the accuracy of this information! Subject to technical modifications and errors!
2.2 Scope of delivery
ProCut multi foam board cutter with integrated transformer, 2 x replacement wire cut to length, 2 x spare fuse, transport and storage case,
instruction manual.
58
128 cm
30 cm at 90° - 22 cm at 45°
13 kg
Thermal
10 A
3 metres
230 V / 50 Hz
Page
Translation of the original instruction
58
58
59
61
62
63
63
67
65
67
68
69
70
70