Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Reset
A reset causes most of the instrument
settings to return to the factory settings.
Not affected by a reset is the meters/feet
selection (V8H2: Units of length).
#
VH
Entry
333
1
V9H5
H
Reset instrument
2. Units of Length
• They may only be entered directly after a
reset. If the units of length are changed at
a later date then all subsequent entries
must be repeated.
• All entries which follow must be in the same
unit as those of the calibration.
#
VH
Entry
(0...1)
2
V8H2
H
Units of length
0: meters
1: feet
Endress+Hauser
3. Application
#
VH
3
V0H3
(0...4)
V0H3: Applications
Text
0: Liquid
1: Rapid level change
2: Liquid/dome cover
Text
3: Coarse bulk solids
4: Conveyor belt
Entry
Text
H
Application
including automatic stirrer
suppression
The distance changes quickly.
including automatic stirrer
suppression
The instrument is mounted
under a dome cover.
The max. initial echo factor is
entered as standard.
(grain size from 4 mm / 0.16 in)
Configuration
Display:
V0H0: Distance in meters/feet
e
13
Werbung
