Parkside PAMS 12 A1 Originalbetriebsanleitung Seite 6

CORDLESS DETAIL SANDER 12V
PAMS 12 A1
Introduction
Congratulations on the purchase of your new
appliance. You have selected a high-quality
product. The operating instructions are part of this
product. They contain important information about
safety, usage and disposal. Before using the product,
please familiarise yourself with all operating and
safety instructions. Use the product only as described
and for the specified range of applications. Please
also pass these operating instructions on to any
future owner.
Intended use
Depending on the sandpaper being used, this
appliance is suitable for the dry sanding of wood,
plastic, metal, filler as well as painted surfaces. The
appliance is particularly suitable for corners, edges
and hard-to-reach areas. Any other usage of or
modification to the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) resulting from improper usage. This
appliance is not intended for commercial use.
Equipment
1 Release buttons
2 Battery pack*
3 Protective cover
4 Adapter
5 Sanding plate
6 ON/OFF switch
7 Battery display LED
8 Adaptor connection
9 Sanding sheet
0 Sanding sheet alignment tool
q Control LED
w Charge level indicator LED
e High-speed charger*
■ 2 │ GB │ IE
Package contents
1 cordless detail sander 12V
4 sanding sheets (60/80/120/240)
1 vacuum adapter for dust extraction
1 sanding sheet alignment tool
1 set of operating instructions
Technical specifications
Cordless Detail Sander 12V PAMS 12 A1
Nominal voltage
Rated idle speed
Nominal oscillation
speed
Rechargeable battery PAPK 12 A1*
Type:
Rated voltage
Capacity
High-speed battery charger PLGK 12 A1*
INPUT
Rated voltage
Power consumption
OUTPUT
Rated voltage
Rated current
Charging time
Fuse (internal)
Protection class
* BATTERY AND CHARGER ARE NOT SUPPLIED
Noise and vibration data
Noise measurement value determined in accord-
ance with EN 62841. The A-rated noise level of
the power tool is typically:
Noise emission values
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Wear ear muffs!
12 V (DC)
n 11000 rpm
0
n 22000 rpm
0
LITHIUM ION
12 V (DC)
2000 mAh
220–240 V ∼,
50–60 Hz (AC)
50 W
12 V (DC)
2.4 A
approx. 60 min
T2A
2 A
II / (double insulation)
L = 77.5 dB (A)
pA
K = 3 dB
pA
L = 88.5 dB (A)
WA
K = 3 dB
WA
PAMS 12 A1