Parkside PAMS 12 A1 Originalbetriebsanleitung Seite 12

Removal
♦ Pull the vacuum cleaner hose off the adapter 4.
♦ Pull off the adapter 4.
♦ Replace the protective cover 3 onto the
adapter connection 8.
Attaching/removing a sanding sheet
WARNING!
► Always disconnect the battery pack 2
before carrying out any work on the appli-
ance.
NOTE
► Before fitting a new sanding sheet, remove
any dust and dirt from the sanding plate 5.
Attachment
You can attach the sanding sheet 9 to the
♦
sanding plate 5 using the Velcro.
♦ Ensure that the extraction holes on the sanding
sheet 9 match up with those on the sanding
plate 5. Use the sanding sheet alignment tool 0
as shown in fig. A on the fold-out page.
Removal
♦ Simply pull the sanding sheet 9 off the sanding
plate 5.
Working procedures
■ Please note that you need to use appropriate
sanding sheets with different grains for working
different materials.
■ Switch the appliance on before applying it to
the workpiece.
■ Apply minimal pressure when working.
■ Work at a constant speed.
■ 8 │ GB │ IE
■ Change the sanding sheets regularly.
■ Never use the same sanding sheet for sanding
different materials (e.g. wood followed by
metal). Optimum sanding results can only be
achieved by using clean sanding sheets.
■ Clean the sanding sheet every once in a while
using a vacuum cleaner.
■ Sand hard-to-reach places with the front or side
edge of the sanding sheet on the sanding plate.
■ Guide the sander over the workpiece in parallel
and use overlapping sanding motions.
■ After completing the task, lift the appliance from
the workpiece and then switch it off.
Maintenance and cleaning
WARNING!
► Always disconnect the battery pack 2
before carrying out any work on the appli-
ance.
The cordless sander is maintenance-free.
■ Always clean the appliance directly after com-
pletion of work.
■ Use a dry cloth to clean the housing.
■ Remove any sanding dust stuck to the appliance
with a brush.
■ Never use sharp objects, petrol, solvents or
cleaning agents which can damage plastic.
Do not allow any liquids to get into the interior
of the appliance.
■ If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The optimum storage
environment is cool and dry.
PAMS 12 A1