Basic Functions Antenna Connection; Battery Pack - Team Electronic TeCom-PS Bedienungsanleitung

English
1
6
2
8
4
9
10
11
18
1 antenna
5
2 LCD
3 channel selector
3
4 microphone
5 On/Off - volume control
6 control LED
7 speaker
8 keypad
9 PTT key
10 monitor key
11 function key
12 charger jack
7
13 battery cover
14 belt clip
15 accessory jack
15
14
13
12
BASIC FUNCTIONS
Antenna Connection
In the PMR- version, the antenna is fixed due to regulati-
ons.
To connect the antenna, place the base of the antenna onto
the SMA thread at the top of the radio and turn the antenna
clockwise.

Battery Pack

Prior to inserting the battery pack, the battery cover (13) on the rear
of the TeCom-PS needs to be removed. The cover is held in positi-
on by two grooves on both sides of the main frame and fixed by a
lock located at the base of the radio.
Unlock the cover by pushing the snap toward the front of the radio.
The word LOCK will be legible. To remove the cover, hold the radio
in both hands with the rear towards you. Place both thumbs onto
the cover and push the lid downwards.
The battery pack has a metal contact on top. Insert the battery in
such a way that the metal part touches the contacts of the radio.
Once the battery pack is in position, put the cover back on. Position
the sides of the lid into the grooves at the side of the radio and
push the lid up.
Lock the cover by pushing the snap toward the rear of the radio.
The word UNLOCK can be read.
English
19