Femi 780XL Gebrauchs- Und Wartungsanleitung Seite 41

5.3. CLEANING - TASKS TO BE PERFORMED
DANGER - WARNING
- BEFORE COMMENCING CLEANING OPERATIONS, PUT ON ADEQUATE
PERSONAL PROTECTIVE EQUIPMENT (SAFETY GLASSES, GLOVES AND MASK
TO PROTECT THE AIRWAYS).
- AVOID USING JETS OF COMPRESSED AIR.
When necessary:
1. Remove any work residues from around the work area and surfaces using a small brush
or vacuum cleaner.
2. Disassemble and clean the extractor fi lter (optional) by tapping it.
Every day:
1. Remove any work residues and dust from the whole machine, using a vacuum cleaner or
a small brush.
2. Clean the power cable.
Once a week:
Disconnect the exhaust fi lter or conduit and thoroughly clean the extractor (optional).
5.4. CHECKS
Every day:
1. Check that the power cable is in tact.
2. Check that all guards are intact.
3. Check that the tool is intact and shows no signs of wear.
5.5. STORAGE OF THE MACHINE WHEN NOT IN USE
When the machine is not in use, place it in safety conditions as described in the heading
"GENERAL SAFETY REGULATIONS".
5.6. ASSISTANCE
If the intervention of expert personnel is required to perform extraordinary maintenance
operations or repairs, always contact an authorized after sales service.
5.7. DISPOSAL OF THE MACHINE, PACKAGING AND MATERIALS PRODUCED BY
MAINTENANCE OPERATIONS
The machine and its packaging are made from 100% recyclable materials.
The electrical and electronic components (indicated by a crossed out wheelie bin symbol) must
be disposed of in accordance with the relative regulations in force.
EN
35