Femi 780XL Gebrauchs- Und Wartungsanleitung Seite 32

EN
1.8. INFORMATION CONCERNING NOISE AND VIBRATIONS
NOTES
For information on noise emissions, please refer to the relative document provided as an
appendix to this manual.
The noise values indicated are emission levels and not necessarily safe operating levels. While
there is a correlation between emission levels and exposure levels, this cannot reliably be used
to determine whether or not further safety precautions are needed.
Factors which infl uence the real level of a worker's exposure include the duration of exposure,
the characteristics of the working environment, other sources of noise, for example the number
of machines or operations being carried out in the near vicinity. Furthermore, levels of safe
exposure may be fi xed differently from one country to another.
This information does however help the machine user to better assess the hazards and
risks.
DANGER - WARNING
IT IS ADVISABLE TO USE SUITABLE HEARING PROTECTION SUCH AS EARMUFFS
OR EAR PLUGS.
Vibrations
The mean frequency-weighted r.m.s. hand-arm acceleration value in normal cutting conditions
using correctly sharpened blades, is less than 2.5 m/s
Test measurements were carried out in accordance with Standards EN ISO 5349-1 and EN
ISO 5349-2.
DANGER - WARNING
VIBRATIONS DURING REAL MACHINE USE MAY DIFFER FROM THOSE DECLARED
AS THE TOTAL VIBRATION VALUE DEPENDS VERY MUCH ON HOW THE MACHINE
IS USED.
IT IS THEREFORE NECESSARY TO IDENTIFY THE MOST APPROPRIATE SAFETY
MEASURES REQUIRED FOR SAFEGUARDING THE OPERATOR BASED ON
ESTIMATED EXPOSURE TIMES AND REAL CONDITIONS OF USE.
1.9. INFORMATION ON ELECTROMAGNETIC COMPATIBILITY
Electromagnetic emissions from the machine do not exceed the limits defi ned by the relative
standards for the envisaged conditions of use.
Testing was carried out in accordance with Standards EN 55014-1 and EN 55014-2.
26
.
2
Cont....