Femi 780XL Gebrauchs- Und Wartungsanleitung Seite 33

1.10. MAIN MACHINE COMPONENTS (Fig. 1)
(1) Control handgrip
(2) Blade tensioning handwheel
(3) Start button
(4) Sliding blade guide
(5) Machine body
(6) Blade
(7) Motor
(8) Power switch
(9) Swivel support
(10) Bar holder
(11) Clamp
(12) Clamp drive
(13) Base
(14) Arm locking pin
(15) Swivel support lock knob
(16) Kill switch "AUTONOMOUS CUTTING" only
1.11. MACHINE DESCRIPTION (Fig. 1)
The bandsaw is made up of two main parts: the machine body (5) complete with motor and
drive system (7) which is joined, by means of a swivel support (9), to the bottom section, made
up of a base (13) and clamp (11).
2. INSTALLATION
2.1 CONTENTS OF THE PACKAGING
• n. 1 bandsaw
• n. 1 Bar holder (OPTIONAL)
• User Manual
• Supplementary insert
2.2. REMOVING THE PACKAGING
Remove the box used to protect the machine during transport.
It is advisable to keep the packaging for future use (for transporting or storing the machine).
2.3. HANDLING
a. Insert the special block by means of the pin (14).
b. Lift the machine as illustrated in (Fig. 2)
NOTE - Machine weight:
For information on the weight of the machine described in this manual, please refer to the
relative document with all the technical details provided as an appendix to this manual.
(ABS105)
EN
27