Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Basic Settings
The machine has basic settings from the factory. It can be
adapted to the user's individual needs either when first
used or later using the following functions.
The basic settings can only be changed if no wash pro-
gramme is running. To change a basic setting, it is first
necessary to hold the programme button pressed and
then press the Quick wash button. The corresponding
functions are shown on the digital display. When the
Quick wash button is pressed repeatedly with the pro-
gramme button held down the display changes.
The basic settings on your machine may be blocked.
However, the time setting and language selection functions
are available.
Example:
Additional rinse (ex factory OFF)
+
To improve the rinse results in soft water areas or for
allergy sufferers, switch on the extra rinse.
Water level during washing (ex factory NORMAL)
+
If the function is set to «increased», the water level is
higher during washing.
Water level during rinsing (ex factory NORMAL)
+
If the function is set to «increased», the water level is
higher during rinsing.
ex factory
Spin speed reduction (
+
Wash programmes
Boil / Coloured wash
Easy care wash
Delicates
Wool
Special programmes
Function switched off
Function switched on
OFF)
Spin speed in rpm
Off
Level 1
Level 2
reduction
reduction
1400
1200
1000
800
800
600
600
600
400
800
600
400
600
600
400
41
Setting the clock (the clock is not set ex factory)
+
The hours can be set using the
minutes using the
Language (ex factory GERMAN)
Press the select-language button
or
+
This setting is temporarily valid for the selected programme
and reverts back to the default language a few minutes
after completion of the programme.
(See «Extended basic settings / Default language»)
Extended basic settings
+
By pressing these three buttons at the same time, the
display shows the extended basic settings.
Repeatedly pressing the
possible settings.
Pressing the
changed.
Pressing the
settings.
Skincare function (ex factory OFF)
Select «Extended basic settings»!
If the skincare function is switched on, two extra rinses
are added to each wash programme.
These additional rinses can prevent skin allergies.
Child lock (ex factory OFF)
Select «Extended basic settings»!
The child lock is to prevent accidental starting, changing or
deletion of a programme by small children.
Operating the machine with the child lock switched on:
+
Hold the start button down and press the Quick wash
button.
Rinsing stop (ex factory INDIVIDUAL)
Select «Extended basic settings»!
If this function is switched on, all easy care, fine wash or
shirt programmes automatically add a rinsing stop.
button and the
button.
to change language
÷
+
button shows the
button allows the settings to be
button interrupts the display of the
Werbung
Kapitel
Inhaltsverzeichnis
