Kärcher KM 85/50 R Bp Pack 2SB Bedienungsanleitung Seite 24

Maintenance intervals
Service hours counter / operating hours / battery charge
ATTENTION
Observe the displays on the display screen when switching on
the device.
Display of next service time for customer service
1
Battery charge display
2
E - Empty
F - Full
Operating hours display
3
Maintenance by the customer
Note
All servicing and maintenance work must be performed by a qual-
ified specialist. If necessary, you can consult a Kärcher specialist
dealer at any time.
● Daily maintenance
1 Check the roller brush and side brush for any tangled pieces
of tape.
2 Check the tyre pressure.
3 Check that the operative elements are fully functional.
4 Clean the dust filter.
● Weekly maintenance
1 Check the moving parts to make sure that they move smooth-
ly.
2 Check the sealing strips in the sweeping area to make sure
they are set correctly and to check for wear.
3 Check the roller brush and side brush for wear.
4 Check the dust filter and clean the filter box as necessary.
5 Check the seat contact switch to make sure it is fully function-
al.
6 Check the tension of belts, check for wear and check that they
are functional.
● Maintenance after wear
1 Replace the sealing strips.
2 Replace the roller brush (observe the wear indicator).
3 Replace the side brush.
Note
See chapter "Maintenance work" for descriptions.
Maintenance by Customer Service
Note
In order to preserve warranty entitlements, all servicing and main-
tenance work during the warranty period has to be performed by
an authorised Kärcher Customer Service, in accordance with the
inspection check list.
The next service time is displayed when switching on the KM 85/
50 R Bp.
● Maintenance every 200 operating hours
1 Have maintenance work carried out as per inspection check
list 5.950-051.0.
24
Checking for wear on the roller brush
New roller brush
1
Roller brush worn
2
Roller brush foot pedal
3
1. Read the roller brush wear.
2. If the foot pedal is set to the MIN position: Replace the roller
brush.
Checking the roller brush for entangled pieces of tape
1. Check the roller brush and side brush for any tangled pieces
of tape.
a The inspection can be made with the waste containers re-
moved.
b For safety reasons, tangled pieces of tape must only be re-
moved when removed.
Replacing / inspecting the roller brush
Removing the roller brush
Knurled screw, left
1
Bearing plate
2
Cover plate
3
Knurled screw, right
4
1. Open and secure the cover.
2. Lower the roller brush.
3. Unscrew the left-hand knurled screw.
4. Remove the bearing plate.
5. Unscrew the right-hand knurled screw.
6. Remove the cover plate.
English
Maintenance work