Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
Starting the unit
When starting the unit, observe the precautions described from Page 4 in the section "For safe use of your product"
to ensure that you operate the product correctly.
Failure to observe the precautions could cause an accident or injury, or even lead to a fatality.
INPORTANT
Use the tool and battery in temperatures between 0°C (32°F) and 40°C (104°F).
1.
Power button
2.
Power indicator LED
3.
Trigger switch lockout
Stopping the unit
1.
Trigger switch
2.
Trigger switch lockout
3.
Power button
WARNING
4.
Trigger switch
5.
Grasping surface
4.
Power indicator LED
5.
Battery
Operation
1.
Remove blade cover.
2.
Push power button once to turn on power to unit.
NOTE
Power indicator LED illuminates when power to unit is
turned on.
3.
Push the trigger switch lockout.
4.
Push the trigger switch.
IMPORTANT
When power to the unit is turned on:
After 90 seconds of inactivity, unit will power itself off.
If the LED remains lit, operation is normal.
If the LED flashes once per second, the battery needs to be
charged.
If the LED flashes four times per second, there is a fault with-
in the product. Turn power off to unit. Remove battery. Clear
debris from around blades. Install battery. Turn power on to
unit. If flashing continues, have your authorized servicing
dealer repair the product.
1.
Release trigger switch and trigger switch lockout, and allow
blades to stop.
2.
Push power button to turn off power to unit.
NOTE
Power indicator LED turns off when power to unit is turned
off.
If the power button does not stop the machine, remove the bat-
tery to stop the power supply to machine. Have your author-
ized ECHO servicing dealer repair power button before using
machine again. If the blades do not stop when the trigger
switch is released, remove the battery to stop the power sup-
ply to machine. Have your authorized ECHO servicing dealer
repair unit before using again.
20
Werbung
