Echo DTT-2100 Bedienungsanleitung Seite 21

Fitting and removing the battery
 The machine will operate when the battery is installed, the power indicator LED is lit, and the trigger switch, trigger switch
lockout, and interlock switch are engaged. Make sure the machine is properly positioned to prevent loss of control and pos-
sible serious injury. Keep movable parts of the machine off the ground and away from objects that could become entangled.
NOTE
 The battery comes partially charged from the factory and needs to be fully charged before first use.
1. Battery
2. Ridge
1. Complete position
2. Uncomplete position
1. Battery
WARNING
3. Battery pack latch
3. Battery pack latch
4. Battery pack
2. Battery pack latch
Before you start
Fitting the battery
1. Align ridges on battery with groove on machine, and insert
battery until battery pack latch gets in the complete position.
IMPORTANT
 Before using the machine, make sure that battery is set cor-
rectly with battery pack latch in the complete position.
NOTE
 Battery pack latch is in the complete position when battery
pack latch is correctly engaged.
Removing the battery
1. To remove battery, depress battery pack latch, and slide bat-
tery out of the machine.
19