Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Never grind with the edge of a grinding
wheel. Grinding with the edge can cause
the wheel to shatter.
MINIMISATION OF NOISE AND
VIBRATION
•
Plan the work so that exposure to heavy
vibrations is spread over a longer period.
•
To reduce noise and vibrations when in
use, limit the time the tool is in use, and
use low-power/vibration mode and
suitable safety equipment.
•
Take the following precautions to
minimise the risks of exposure to
vibrations and/or noise:
–
Only use the tool in accordance with
these instructions.
–
Check that the tool is in good
condition.
–
Use accessories in good condition,
and which are suitable for the
purpose.
–
Keep a firm grip on the handles/
grips.
–
Maintain and lubricate the tool in
accordance with these instructions.
SYMBOLS
Read the instructions.
Wear ear protection.
Wear safety glasses.
Safety class II
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Rated voltage
Rated output
Speed, no load
Diameter, grindstone
Saw blade diameter
Weight
Sound pressure level, LpA: 69.0 dB(A), K= 3 dB
Sound power level, LwA:
Always wear ear protection!
The declared values for vibration and noise, which
have been measured according to a standardised
test method, can be used to compare different
tools with each other and for a preliminary
assessment of exposure. The measurement
values have been determined in accordance
with EN 62841-3-4:2016.
WARNING!
The actual vibration and noise level when
using tools may differ from the specified
maximum value, depending on how the tool
is used and the material being processed.
It is therefore necessary to determine which
safety precautions are required to protect
the user, based on an estimate of exposure
in actual operating conditions (taking into
account all stages of the work cycle, e.g. the
time when the tool is switched off and when
it is idling, in addition to the start-up time).
DESCRIPTION
The product is intended to be used for
sharpening circular saw blades with a diameter
of up to 400 mm.
Parts
1.
Motor
2.
Blade holder
3.
Support for saw blade
4.
Handle
EN
230 VAC, 50 Hz
110 W
5700 rpm
100 mm
90–400 mm
5.4 kg
82 dB(A), K= 3 dB
25
Werbung
