Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
jewellery and long hair can get caught in
moving parts.
•
If dust extraction and dust collection
equipment is available, this should be
connected and used correctly. The use of
such devices can reduce the risk of
dust-related problems.
•
Do not allow familiarity with similar tools to
lead to exaggerated self-confidence and to
neglect the safety instructions for the tool. A
moment of inattention or carelessness can
result in serious personal injury.
USING AND LOOKING AFTER
POWER TOOLS
•
Do not force the power tool. Use the
correct power tool for the planned work.
The tool does the job better and more
safely when used at the rate for which it
was designed.
•
Do not use the power tool if it cannot be
switched on and off with the power
switch. Power tools that cannot be
controlled with the power switch are
dangerous and must be repaired.
•
Pull out the plug and/or remove the battery
before making any adjustments, changing
accessories or putting the power tool away.
These safety precautions reduce the risk of
accidentally starting the power tool.
•
Store power tools out of the reach of
children when not in use. Never allow
children, or anyone who is unfamiliar with
the power tool and these instructions, to
use the tool. Power tools are dangerous if
used by inexperienced persons.
•
Maintain power tools and accessories. Check
that moving parts are properly adjusted and
do not jam, and that no parts are incorrectly
fitted or damaged. Check for other factors
that could affect functionality. If a power tool
is damaged it must be repaired before it is
used again. Many accidents are caused by
poorly maintained power tools.
•
Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to jam
and are easier to control.
24
•
Use the power tool, accessories and bits
etc., in accordance with these instructions,
taking into account the actual working
conditions and the work that is to be
done. It can be dangerous to use power
tools for purposes other than those for
which they are intended to be used.
•
Keep handles and grips clean, dry and free
from oil and grease. Greasy handles and
grips make it difficult to hold and control
the tool in unexpected situations.
SERVICE
•
Power tools must only be serviced by
qualified personnel using identical spare
parts. This will ensure that the power tool
remains safe to use.
SAFETY INSTRUCTIONS FOR
BENCH GRINDER
•
Do not use damaged accessories. Always
check before use that grinding wheels and
other accessories are not cracked or
otherwise damaged, and that steel
brushes do not have loose or broken
wires. When the accessory has been
checked and fitted, hold the product at a
safe angle and run it at maximum speed
for 1 minute. If the accessory is damaged
it will probably break during this test.
–
Disregard "and that steel brushes do
not have loose or broken wires" for
products not intended to be used
with steel brushes.
•
Only use accessories with at least the same
rated speed as the product. Accessories
that rotate faster than their rated speed
can shatter and cause personal injury.
•
Note that wires can come loose from steel
brushes, even during normal use. Do not
overload the wires by pressing the steel
brush too hard against the surface. Wires
from steel brushes can easily penetrate
through thin clothes and/or skin.
–
The above safety instructions only
apply to products intended to be
used with steel brushes.
Werbung
