EN
Compatibility:
Smart device operational system
WIfI network
The device cannot be operated on IEEE 802.1X-secured Wifi networks (usually
Charging adapter
Device manufacturer's name or trademark,
business registration number and address
AC adapter model identifier
Input voltage
Input frequency
Output voltage
Output current
Output power
Average efficiency in active mode
Low load efficiency (10%)
Power consumption without load
Appliance protection class
Charging station
Appliance protection class
Input voltage
Hereby, ETA a.s. declares that the radio equipment type ETA1244 is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the
ETA internet address.
The manufacturer reserves the right to change the technical specifications for the
respective model. The manufacturer reserves the right to change/update the ETA
SMART application without prior notice. Due to the character of such changes/
updates, some information or procedures in this manual might become obsolete or
might be missing.
The capacity of the product battery decreases over time. Decreasing of battery
capacity occurs during normal use of the appliance and is considered usual
wear and tear of the appliance. Decreasing battery capacity is not a defect of the
appliance.
- Android 6.0 and higher
- IOS 11.0 and higher
- 2.4 Ghz
- WPA1 and WPA2 security (recommended WPA2)
NOTICE
corporate Wifi networks).
EN - 56
ETA
XDJ121T-120100
100-240 V (AC)
50/60 Hz
12 V (DC)
1 A
12,0 W
≥ 82.96 %
≥ 67 %
0,1 W
II.
III.
12 V (DC)