Preparation For Use; Vacuum Cleaner Preparation; Vaccum Cleaner Use; Switching On The Vacuum Cleaner - Eta Rondo Bedienungsanleitung

EN

4. PREPARATION FOR USE

Remove all packing material, remove vacuum cleaner and accessories.
Remove any adhesive, stickers, or paper from the vacuum cleaner.

4.1 VACUUM CLEANER PREPARATION

Install side brushes
4.2 CHARGER STATION INSTALLATION
1. Place the charging station on the floor. Make sure there is enough space on the sides of
the base (at least 1 m) and in front of the base (at least 2 m). Don´t expose the charging
dock to sunshine.
2. Connect the adapter to the charging station and then to the wall outlet. (the indicator
lights up D1).

5. VACCUM CLEANER USE

Insert the battery into the remote control, observe correct polarity (2 pieces, battery type AAA).

5.1 SWITCHING ON THE VACUUM CLEANER

1. Press button C1 for approx. 3 seconds.
2. First you hear beep of successful switching on the device (light signalisation is on).
The vacuum cleaner can be also switched on by placing it in the charging station
connected to the mains.
Untill the vacuum cleaner is not switched on, it cannot be controlled by remote control.
1 m
1 m
2 m
EN - 48