eta Rondo Bedienungsanleitung Seite 53

7.1 CHARGING CONTACTS CLEANING
Switch off the vacuum cleaner and disconnect the charging station from the power
supply! Clean the charging contacts (A3, D3) on the vacuum cleaner and on the station
with a soft dry cloth. Clean at least once a month. Do not use aggressive cleaning
agents or oils to clean the contacts.
7.2 DIRT TANK AND FILTERS CLEANING
1. Remove the dirt tank B from the vacuum cleaner. Dispose of dirt together with normal
household waste.
2. Clean the dirt tank with the wet cloth.
3. Remove the filters from the dirt tank. Blow or knock the HEPA filter B4 gently. Foam filter
B5 can be rinsed in flowing water.
• For filters cleaning do not use aggressive detergents or cleaning agents or hot water
• Dry cleaning is recommended to maintain HEPA filter parameters.
• If you choose to wash the HEPA filter with water, its filtering ability will be reduced.
• The maximum number of filter washes is 3x. Then it is necessary to buy a new one.
• It is recommended to change the HEPA filter at least twice a year.
• The filters are not intended for use in a dishwasher.
• Cleaning failure and possibly filters replacing can lead to malfunction of the vacuum
cleaner!
4. After the maintenance, assembly dirt container incl. filters, insert it back to the device or
store in a suitable and safe place.
NOTICE
EN - 53
EN