Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
Standby:
-
The robot vacuum cleaner will automatically enter standby mode after 10 minutes of
inactivity.
-
Press the Start/Pause button on the robot vacuum cleaner or in the app to activate it again.
Cleaning modes
-
This robot includes different modes and functions that can be activated via the app.
-
In addition, in every one of the cleaning modes on the app, you will be able to select the
Turbo mode on carpets, which activates the maximum suction power when the robot
vacuum cleaner detects a carpet.
Edge mode:
-
When this mode is selected, the robot will clean along walls and around furniture (e.g.,
table or chair legs).
-
Press the edge cleaning mode in the app.
Spiral mode:
-
The robot will carry out an intense cleaning of a specific area when this mode is activated.
It will start cleaning at a specific spot and will move outwards in a spiral motion, and it will
return to the starting spot in an inwards spiral motion again.
-
When it finishes and returns to the starting spot, the robot vacuum cleaner will return to
the charging base directly.
-
Before using this mode, place it in the spot you wish to clean.
-
Select the spiral cleaning mode on the app.
Scrubbing mode:
4. Attach the mop to the bracket and the latter to the mixed tank. Fill the water tank.
5. Insert the mixed tank into the robot vacuum cleaner and select the cleaning mode and
scrubbing level in the application: medium, low, or high.
6. Once you have selected the desired scrubbing level, the robot vacuum cleaner will start the
All in One function to vacuum, scrub, and sweep simultaneously thanks to its mixed tank.
Note:
-
If you wish to mop, do not fill the water tank.
-
To ensure a perfect scrubbing from the start, it is suggested to dampen the mop evenly
with water before fixing it to the mixed tank. It is also recommended to wash the mop after
every use.
-
It is recommended to be present when the robot is scrubbing.
-
When the robot vacuum cleaner returns to the charging base, you must remove the mop.
Do not leave the robot vacuum cleaner charging with the mop assembled.
54
Manual mode:
The robot vacuum cleaner can be moved manually by selecting manual mode in the application
and using the arrow keys.
Back home mode:
Press the Back Home button on the robot vacuum cleaner or select the option in the app to
send the robot vacuum cleaner to the charging base in any cleaning mode. The robot vacuum
cleaner will continue vacuuming until it reaches the charging base.
Smart area mode:
-
Once the home's map has been saved, select this mode for the robot to clean a specific
area in zigzag motion. The robot will clean the selected area and then it will return directly
to the charging base. You can set more than 1 area at the same time. The robot will only
clean the area selected on the map; therefore, it will go to the spot and return to the base
without vacuuming.
-
To activate this mode, select the smart area option on the app.
Spot mode:
-
Select this mode if you want to thoroughly clean a specific point in the map, making the
most of the robot vacuum cleaner's maximum power. The robot vacuum cleaner will clean
an area of 1.6m x 1.6m in a zigzag pattern and return directly to the charging base once
finished. The robot will only clean the area selected on the map; therefore, it will go to the
spot and return to the base without vacuuming.
-
To activate this mode, select the spot cleaning option on the app.
Restricted Area mode:
-
Select this mode and delimit on the map specific areas where you do not want the robot to
clean. You can set more than 1 restricted area at the same time on the map.
-
To activate this mode, select the restricted area cleaning option on the app.
Complete cleaning mode:
-
Select this mode to perform a deep cleaning of your house. The robot vacuum cleaner will
clean in edge mode and continue to zigzag horizontally and vertically. It will then return to
the charging base.
-
To activate this mode, select the complete cleaning option on the app.
Power level function:
Select the power level on the app to control the robot suction power during cleaning processes.
There are three suction power levels: Turbo, Normal, and Eco.
Cleaning scheduling:
-
To make cleaning easier, the robot has a function that allows it to be programmed daily
ENGLISH
ETERNAL LASER VITAL
55
Werbung
