Amp Probe Setup; Stored Tests - Tecnotest 3167 Bedienungsanleitung

________________________________________________________________________BATTERY TESTER
This displays the edit screen.
5. Enter the desired text as follows:
a. Press (and hold down) the Up Arrow key until the desired letter or number
appears (after using the Up Arrow key, you can also use the Down Arrow key).
b. Press the GO key to move to the next space (two blinking dots indicate the
currently selected space.)
c. Repeat a and b until the text is entered.
NOTE:
To leave a space blank, just press the GO key. To move to the next line, repeatedly
press the GO key.
6. When finished, press the MENU key twice to return to the main menu.
5.6 -

Amp Probe Setup

The Utilities, Amp Probe Setup function lets you set up (or turn off) an optional amp
probe used with the Multimeter function. For detailed instructions, refer to
"AMP PROBE SETUP" on chapter 4.2.
5.7 -

Stored Tests

The Utilities, Stored Tests function stores up to 25 tests and lets you review them later.
To view stored test results, follow these steps:
1. Press the ON key to turn the tester on. This displays the main menu.
NOTE:
The word GO indicates the selected item.
2. Repeatedly press the Down Arrow key until UTILITIES shows on the screen and
is selected. Then press the GO key. This displays the Utilities menu.
OPERATING INSTRUCTIONS
'MENU' TO EXIT NOW
QUICK TEST
MULTIMETER
VIEW LAST TEST
UTILITIES GO

63