Respekta CH 99040 60 Bedienungsanleitung Seite 60

5. Do not damage the grid of metal-made grease filters. The colour of the metal
surface may change due to frequent cleaning as well as the use of aggressive
detergents.
6. Such changes do not influence the capacity of the appliance and are no reason
for complaint.
Disregarding the cleaning and maintenance instructions will cause an
You must replace the grease filters periodically. Follow the instructions given below.
Type of filter
Acrylic grease filter
Metal
 Conventional carbon and active carbon filters cannot be cleaned. The capacity of
these filters is limited. You can use such filters for about 3-6 months. Replace a
depleted filter. You can get further information on the filter packaging.
1. Replace a defective illuminant immediately.
2.
WARNING! Disconnect the appliance from the energy supply.
3. Let the illuminant cool down before replacing.
WARNING!
increased risk of fire.
Changing the grease filter
Once or twice a month depending on frequency of use
You do not need to replace metal filters. Clean them once
a month by hand or in a dishwasher (30
acrid or corrosive detergents. Do not put the filter in the
dishwasher together with tableware Filters which are
blocked with food debris do not carry a guarantee. Dry
the filters properly before you reinstall them.
Do not use any abrasive detergents!
Do not use any
alkaline dishwasher-detergents!
(ph more than 7).
Carbon filter
Changing the illuminant -LED
Replacement
60
0
). Do not use any