Cleaning And Maintenance - Respekta CH 99040 60 Bedienungsanleitung

Light
The indicator light indicates the current setting.

7. CLEANING AND MAINTENANCE

Disconnect the appliance from the mains before you clean or maintain it.
1. Never use any alcohol-containing detergents to clean matt black painted
appliances as these detergents cause changes in colour.
2. Clean or replace the grease filters regularly. Fat-saturated filters will easily catch
fire and cause unpleasant odours.
3. Contaminated grease filters increase the capacity of the appliance.
4. Clean the surfaces with warm water and a mild, non-acrid detergent.
5. When you clean or replace the grease filters or the carbon filters also clean all
visible components on the bottom of the appliance with a mild, non- acrid and fat-
dissolving detergent.
6. The motor and electric components of the appliance must not come in contact
with water.
7. Do not clean the control panel with a wet cloth. Use a damp cloth; otherwise water
will get into the panel and damage the electric components.
8. Do not use a steam cleaner.
9. Do not use any abrasive detergents.
Appliances with stainless steel housing
1. Use a non-abrasive detergent for stainless steel which is available at your
supermarket.
2. Use a maintenance product for stainless steel. Use such a product carefully and
economically.
3. Do not clean the control panel with a detergent for stainless steel. Use a
damp cloth.
4. When you clean or replace the grease filters or the carbon filters also clean all
visible components on the bottom of the appliance with a mild, non- acrid and fat-
dissolving detergent.
 Touch to switch the light on or off.
6. CONTROL PANEL
WARNING!
Cleaning
appliance
Cleaning
59