Respekta CH 99040 60 Bedienungsanleitung Seite 47

You can fix an exhaust hose with an adapter (depending on model if included in delivery) on
the appliance. Fix the adapter with four screws above the opening on the top of the appliance
and insert the exhaust hose. The exhaust hose must horizontally lead away from the
appliance respectively must not been bent more than 120
properly work.
A Air duct
1. Position the suspension device on the wall. Choose a proper position which meets
the dimensions of the chimney.
2. Mark the position of the holes with a pencil.
3. Now drill the holes and fix the suspension device with the screws and dowels/plugs.
4. Suspend the hood.
5. Now connect the exhaust hose to the corresponding outlet of the hood.
6. Install the exhaust hose to the corresponding outlet (look at figure A/B).
7. Now fix the chimney back brace onto the chimney.
8. Now fix the complete chimney onto the hood.
9. Fix the chimney mounting rail into the desired position on the wall with the screws and
dowels.
10. Pull the telescopic part to the mounting rail and fix it on the rail.
11. Put in the plug and insert the grease filters.
0
. Otherwise the appliance does not
B Through a wall
47