Werbung
Verfügbare Sprachen
Verfügbare Sprachen
All manuals and user guides at all-guidesbox.com
At any time, you can press TEST button to stop the measurement.
Discharge the Tested Object
The tested object discharges through the meter. Keep the probes touched to the test points until the abject is
completely discharged.
Note:
For capacitive load, you should discharge it fully alter the measurement to avoid personal injury.
Maintenance
This instrument is an exact unit, please maintain it carefully.
Don open the case unless you need to do so.
Before you open battery door, remove all the test leads from the jack first.
lf you don't use this meter for a long time, please take out the battery and place the meter in dry and
ventilating place.
Don`t change the meters circuit to avoid damage.
BATTERY REPLACEMENT
When the Symbol "
" appears on the display, it shows that the battery should be replaced. To replace the
battery, remove the screws on the battery case, replace the exhausted batteries with new batteries of the
same type (1.5V, AA battery, 6 units), rejoin the cover and reinstall the screws.
ACCESSORIES
1. Special test leads
2. Manual
3. Transport bag
DISPOSAL OF THE ARTICLE
Dear Customer, please help avoiding refuse.
If you at some point intend to dispose of this article, then please keep in mind that many of its components
consist of valuable materials, which can be recycled.
Please do not discharge it in the garbage bin, but check with your local council for recycling facilities in your
area.
13
Werbung
