Endress+Hauser Liquiphant FTL33 Bedienungsanleitung Seite 65

Liquiphant FTL33
10 Repair
Repair is not envisaged for the point level switch.
10.1 Spare parts
The web site for the W@M Device Viewer (www.endress.com/deviceviewer): All spare parts
for the measuring device are listed here together with the order code and can be ordered here.
If available, users can also download the associated Installation Instructions.
10.2 Return
The measuring device must be returned if repairs or a factory calibration are required, or if the
wrong measuring device has been ordered or delivered. According to legal regulations,
Endress+Hauser, as an ISO-certified company, is required to follow certain procedures when
handling returned products that are in contact with medium.
To ensure swift, safe and professional device returns, please read the return procedures and
conditions on the Endress+Hauser website at
10.3 Disposal
When disposing, separate and recycle the device components based on the materials.
11 Accessories
Detailed information on accessories can be found in the technical documentation
TI01148F.
Designation
Weld-in adapter
Seals, o-rings
Process adapter M24
Slotted nut
Plug-in jack M12
with cable 5 m (16 ft)
Socket wrench for mounting
Test magnet
Endress+Hauser
www.services.endress.com/return-material
Additional information

Detailed information can be found in TI00426F/00/EN "Weld-in
adapter and flanges" and in the supplementary documentation
→  39.

Detailed information can be found in TI01148F/00/EN.
• IP69K, coupling nut 316L
– Elbowed 90° with LED, order number: 52018763
– Elbowed 90° without LED, order number: 52024216
• IP67, coupling nut (Cu Sn/Ni)
– Elbowed 90°, order number: 52010285
– Straight, order number: 52006263
Hexagon bolt, AF32, order number: 52010156
Order number: 71267011
Repair
65