Endress+Hauser Liquiphant FTL33 Bedienungsanleitung Seite 49

Liquiphant FTL33
5.1.6 Marking
The marking indicates the position of the tuning fork. If installed horizontally in vessels, the
marking is face up.
The marking appears either as a material specification (e.g. 316L) or a thread designation
(e.g. G ½") in the following locations:
• On the hexagonal bolt of the process adapter
• On the nameplate
• On the weld-in adapter
 18 Orientation in the vessel
 19 Orientation in the pipe
Endress+Hauser
Installation
A0022641
A0022804
49