Technical Data - Meec tools 011488 Bedienungsanleitung

EN
Seek medical attention if you get battery
fluid in your eyes. Leaking battery fluid can
cause skin irritation or burn injuries..
REDUCTION OF NOISE AND
VIBRATIONS
• Plan the work so that exposure to heavy
vibrations is spread over a longer period.
• To reduce noise and vibrations when in
use, limit the time the tool is in use, and
use low-power/vibration mode and
suitable safety equipment.
• Take the following precautions to
minimise the risks of exposure to
vibrations and/or noise:
– Only use the tool in accordance with
these instructions.
– Check that the tool is in good
condition.
– Use accessories in good condition,
and which are suitable for the purpose.
– Keep a firm grip on the handles/grips.
– Maintain and lubricate the tool in
accordance with these instructions.
DUST
• Dust produced during the work can be
harmful to health, carcinogenic,
flammable or explosive. Use a dust filter
mask and suitable equipment for dust
extraction/collection.
• The dust from some alloys can catch fire,
or explode. Mixtures of materials increase
the risk – keep the work area clean.
WARNING!
Fire risk. Dust in dust bags, vacuum cleaners
or filters can self-ignite or be ignited by
sparks, hot workpieces or other sources of
heat, especially if it comes into contact with
polyurethane, solvent-based paint and other
chemicals. Make sure that the tool and/or
workpiece do not overheat. Always empty
the dust container before pausing the work.
22
SYMBOLS
Read the operating
instructions.
Wear eye and ear protection.
Wear a dust filter mask.
Recycle discarded product
in accordance with local
regulations.

TECHNICAL DATA

Voltage
Speed
Sandpaper size
Dust collector*
Weight
Size
Sound pressure level, LpA
Sound power level, LwA
Vibration level, A h
*Connection to vacuum cleaner.
Always wear ear protection.
The declared values for vibration and noise,
which have been measured according to a
standardised test method, can be used to
compare different tools with each other and for
a preliminary assessment of exposure.
The measurement values have been determined
in accordance with EN 62841-2-4:2014.
WARNING!
The actual vibration and noise level when
using tools may differ from the specified
maximum value, depending on how the
tool is used and the material. It is therefore
18 V
10000 /min
125 mm
Yes
approx. 1 kg
230 x 130 x 170 mm
76 dB(A), K=3 dB
87 dB(A), K=3 dB
9.5 m/s², K=1.5 m/s²