Werbung
Verfügbare Sprachen
Verfügbare Sprachen
■
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
■
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
■
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
■
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
BATTERY TOOL USE AND CARE
■
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
■
Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
■
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
■
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
SERVICE
■
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
LOPPER SAFETY WARNINGS
DANGER
Keep hands away from the blade. Contact with the blade
will result in serious personal injury.
■
N
ever allow children, persons with reduced physical,
sensory, or mental capabilities or lack of experience
and knowledge, or people unfamiliar with these
instructions to use the product. Local restrictions may
limit the age of operator.
2
| English
■
The product has a fi xed length of 0.85m.
■
Do not use the product when there is a possibility of
thunderstorm or lightning. Store the product safely
indoors.
■
Beware of overhead power lines.
■
Ensure all guards and handles are properly fitted and
are in good condition.
■
Wear full eye and ear protection while operating the
product.
■
Wear heavy, long trousers, boots, and gloves. Do not
wear loose fitting clothing, accessories, or use the
product with bare feet.
■
Do not start using the product until you have a clear
work area, secure footing, and a planned retreat path
away from the falling branches or limbs.
■
Do not use a power tool while you are tired or under the
influence of drugs, alcohol, or medication.
■
During operation, hold the product with both hands. Use
one hand to firmly grasp the front hand grip. Use the
other hand to grasp the rear handle and operate the
trigger release and on/off trigger.
■
Ensure that the lopper is correctly located in a
designated working position before starting the product.
■
Never operate the product with the cutting means
closer than 10m from overhead power lines.
■
Take frequent work breaks. Limit the amount of
exposure per day.
■
Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance and can
result in serious injury.
■
Do not operate the lopper with a damaged or
excessively worn cutting device.
■
Do not modify the product in any way or use it to power
any attachments or devices not recommended by the
manufacturer.
■
Identify the quick release mechanism and practice
using it before you start using the product. Its correct
use may prevent serious injury in the case of an
emergency. Never wear additional clothing over
the harness or otherwise restrict access to the quick
release mechanism.
■
Do not operate in poor lighting. Use the product in
daylight or good artificial light.
■
Do not operate the lopper if the cutting mechanism
does not work properly.
■
To protect yourself from falling branches, do not stand
directly under the branch or limb being cut. This product
should not be held at an angle over 60° from ground
level.
■
To reduce the risk of injury associated with contacting
moving parts, always stop the product, make sure all
moving parts have come to a stop, and take the battery
out before:
●
cleaning or clearing a blockage
●
leaving the product unattended
●
installing or removing attachments
●
checking, conducting maintenance, or working on
the product
Werbung
