Cleaning Cloth Programs - Miele PWM 912 Bedienungsanleitung

Cleaning cloth programs

These programs are suitable for washing, disinfecting, and finishing (at different humidity
levels) cleaning cloths made of cotton, mixed fiber, or microfiber fabric used in facility
management.
Standard Cloths
Type of fabric
Program se-
quence
Extras
Clean. Cloths Standard+rtu
Type of fabric
Program se-
quence
Extras
140°F/60°C (Cold to 195°F/90°C)
Cotton, viscose, polyester, and microfiber clean-
ing cloths
Pre-rinse
Pre-wash up to 85°F (30°C)
Main wash up to 195°F (90°C), wash time 6 min
2 rinsing baths
Final spin
Soak, Water plus, Intensive, Rinse plus, Fill stop,
Rinse hold
140°F/60°C (Cold to 195°F/90°C)
Cotton, viscose, polyester, and microfiber clean-
ing cloths
Same program sequence as Cloths standard
then set the residual moisture via the extra " –
" (moist, damp, wet, dripping wet)
The pre-set residual moisture is 2 drops (damp)
Pre-wash, Soak, Water plus, Intensive, Rinse
plus, Fill stop, Rinse hold
en - Program overview
Fill ratio/Load
size
PWM 912 – 13 lb
(6.0 kg)
PWM 916 – 18 lb
(8.0 kg)
PWM 920 – 22 lb
(10 kg)
For number,
"Cleaning cloths
load size" chart
1:18
see
75