Cleaning Cloth Programmes - Miele PWM 514 Montageanweisung

Cleaning cloth programmes

These programmes are suitable for washing, disinfecting and finishing (at different humid-
ity levels) cleaning cloths made of cotton, mixed fibre or microfibre fabric used in facility
management.
Standard cloths
Fabric
Programme se-
quence
Extras
Standard cloths + rtu
Fabric
Programme se-
quence
Extras
60 °C (Cold to 90 °C)
Cotton, viscose, polyester and microfibre clean-
ing cloths
Pre-rinse
Pre-wash up to 30 °C
Main wash up to 90 °C, wash time 6 min
2 rinse cycles
Final spin
Soak, Water plus, Intensive, Rinse plus, Fill stop,
Rinse hold
60 °C (Cold to 90 °C)
Cotton, viscose, polyester and microfibre clean-
ing cloths
Same programme sequence as Cloths standard
then set the residual moisture via the extra " –
" (moist, damp, wet, dripping wet)
The pre-set residual moisture is 2 drops (damp)
Pre-wash, Soak, Water plus, Intensive, Rinse
plus, Fill stop, Rinse hold
en - Programme summary
Load ratio/Load
size
PWM 514 – 7 kg
PWM 520 – 10 kg
"Cleaning cloths
1:18
For number,
see
load size" chart
125