Program Overview - Basic Programs; Whites Programs - Miele PWM 912 Bedienungsanleitung

Program overview – basic programs
The wash time is the minimum main wash time after the set temperature is reached. The
times for water intake, dispensing, heating, intermediate spinning, etc. are not included.

Whites programs

Whites
Type of fabric
Program se-
quence
Extras
* The standard programs Whites and Cottons Plus are programmed with hot water rinses. If hot water is available, we
recommend using hot water for the final rinse:
– The residual moisture of the laundry is lower after the spin cycle.
– The laundry is already warmed.
– This saves time and energy if the laundry is immediately either dried in a tumble dryer or ironed with a rotary iron.
195°F/90°C (160°F to 195°F/70°C to 90°C)
Cotton, linen, and mixed-fiber fabrics, e.g., bed
linen and toweling
Main wash up to 195°F (90°C), wash time 11 min
Cool down can be activated in the Miele Bench-
mark Programming Tool
2 rinses
Last rinse hot*
Final spin
Pre-wash, Soak, Water plus, Intensive, Rinse
plus, Fill stop, Rinse hold
en - Program overview
Fill ratio/Load
size
PWM 912 – 27 lb
(12 kg)
PWM 916 – 36 lb
(16 kg)
PWM 920 – 45 lb
(20 kg)
1:9
51