Miele PWM 912 Bedienungsanleitung Seite 73

The Mops rtu program is suitable for the subsequent finishing of clean and dry mops. A
disinfecting agent is applied during finishing.
The dispensing quantities must be set on site and the standard of disinfection must be
checked.
Mop load size (cotton) applies to the fill ratio 1:9
Mop size/ 15 3/4"
weight (40 cm)
6.7 oz
(190 g)
mops
PWM 912 Qty. 63
PWM 916 Qty. 84
PWM 920 Qty. 105
Tip: When using microfiber mops, the load size is higher due to the lower mop weight.
Mop load size (microfiber) applies to the fill ratio 1:9
Mop size/weight
PWM 912
PWM 916
PWM 920
A reduced number may apply to particularly high-volume, light-weight mops.
19 11/16" 23 5/8"
(50 cm) (60 cm)
7.7 oz 9.8 oz
(220 g) (280 g)
mops mops
Qty. 55 Qty. 43
Qty. 73 Qty. 57
Qty. 91 Qty. 71
15 3/4" (40 cm)
4 oz (120 g) mops
Qty. 100
Qty. 133
Qty. 167
en - Program overview
31 1/2" 43 5/16"
(80 cm) (110 cm)
12.7 oz 1.1 lb
(360 g) (510 g)
mops mops
Qty. 33 Qty. 24
Qty. 44 Qty. 31
Qty. 56 Qty. 39
19 11/16" (50 cm)
6 oz (170 g) mops
51 3/16" 63"
(130 cm) (160 cm)
1.3 lb 1.6 lb
(610 g) (720 g)
mops mops
Qty. 20 Qty. 17
Qty. 26 Qty. 22
Qty. 33 Qty. 28
Qty. 71
Qty. 94
Qty. 118
73