Cleaning Contractors Program Overview - Miele PWM 912 Bedienungsanleitung

en - Program overview

Cleaning Contractors program overview

These programs are suitable for washing, disinfecting, and finishing (at different humidity
levels) cotton or mixed fiber mops, floor mats, polishing pads, and cleaning cloths used in
facility management.
Cleaning textiles can even come out of the machine finished and ready to use (rtu).
To avoid recontamination, the water for the rinse cycles in the disinfection programs is not
supplied via the detergent drawer.
With the Mops . . . + ready to use (rtu) programs, the mops are ready to use and already
impregnated with cleaning product and disinfectant. To achieve this, following washing or
disinfection there is a finishing stage and then a final spin. The desired humidity level of
the mops can vary by setting the residual moisture via the extra " – " (moist, damp,
wet, dripping wet).
The dispensing quantities must be set on site and the standard of disinfection must be
checked.
68